Cisco Firepower 9300 Command Reference

show fabric
To view fabric cabling information, use the show fabric command in cabling mode.
show fabric [breakout|detail|expand]
Syntax Description
(Optional) Displays cabling information specific to Fabric A.
There is no Fabric B.
Note
a
(Optional) Displays detailed cabling information. The expand keyword is
available with this option.
detail
(Optional) Displays expanded cabling information including port breakouts.
The detail keyword is available with this option.
expand
Command Modes
scope cabling/
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this command displays general fabric cabling information.
Example
This example shows how to display expanded cabling information:
firepower# scope cabling
firepower /cabling # show fabric expand
cabling on switch:
Id: A
port breakout:
Slot ID Port ID breakout type
---------- ---------- -------------
3 1 10g 4x
3 2 10g 4x
firepower /cabling #
Related Commands
DescriptionCommand
Creates a new interface breakout.create breakout
Cisco Firepower 4100/9300 FXOS Command Reference
263
S Commands
show fabric

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes