Cisco Firepower 9300 Command Reference

(Optional) Displays information on the iSCSI Qualified Name (IQN) identities
for a system.
The following optional keywords are also available:
• detail —Displays details about the identity information in list format.
• pool-info —Displays IQN identity information for the pool. The detail
keyword is also available.
• profile-info —Displays IQN identity information for the profile. The
detail keyword is also available.
• prefix —Displays information for the specified IQN prefix.
• name —Displays information for the named IQN identity; can be a
maximum of 510 characters.
By default, this command lists information on all IQN identities configured
for an IQN pool.
iqn
(Optional) Displays MAC-address identity information for a system.
The following optional keywords are also available:
• id —Displays identity information for a specific MAC address. Specify
a MAC address in the format AA:BB:CC:DD:EE:FF.
• detail —Displays details about the identity information in list format.
• pool-info —Displays MAC-address identity information for the pool.
The detail keyword is also available.
• profile-info —Displays MAC-address identity information for the profile.
The detail keyword is also available.
mac-addr
(Optional) Displays the universally unique identifier (UUID) identity
information for a system.
The following optional keywords are also available:
• derived id—Displays derived identity information for the specified UUID;
entered in the form FFFF-FFFFFFFFFFFF.
• detail —Displays detailed UUID identity information.
• uuid_prefix —Displays identity information for the specified UUID prefix;
entered in the form FFFFFFFF-FFFF-FFFF.
• uuid —Displays identity information for the specified UUID; entered in
the form FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF.
• pool-info —Displays UUID identity information for the pool. The detail
keyword is also available.
• profile-info —Displays UUID identity information for the profile. The
detail keyword is also available.
uuid
Cisco Firepower 4100/9300 FXOS Command Reference
275
S Commands
show identity

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes