4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4-51
Setup Menu: Outputs: TS Out: ASI, Continued
Descramble Mode
Description: This parameter selects whether the transcoder should scramble the
output even if it is authorized to receive the channel.
Parameters: Scrambled or Descrambled. Default is Descrambled.
Regenerate
Description: This selects whether to regenerate the PSI tables.
Parameters: Always or As Needed.
Insert Null Packet
Description: This parameter selects whether to insert null packets in the output
stream.
Parameters: Yes, No. It is recommended that this field always be set to Yes to
ensure the best compatibility with equipment that the D9858
transcoder is to be connected.
MOIP1
Name
Description: This is the name assigned to the transport output for ease of
reference.
Parameters: 20-character string.
Rate Control
Description: This is the DPM output rate control (in Mbps) when using an RF
input source.
Descramble Mode Description
Scrambled Scrambles the output channel even if the
PE is authorized and can descramble the
channel.
Descrambled Descrambles the output channel, and
passes in-the-clear channels.
To Next Page
Loading...
Need help?
General