4-56 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Setup Menu: Outputs: TS Out: MOIP1, Continued
MGMT Port Mode
Description: This selects the Interface 1 MPEGoIP mode.
Parameters: No Output, IGMP or Always Output.
DATA Port Mode
Description: This selects the Interface 2 MPEGoIP mode.
Parameters: No Output, IGMP or Always Output.
SAP Multicast Address
Description: This is the SAP destination IP address.
Parameters: 0 to 255 for each of the four fields in the format ###.###.###.###.
PCR Addition
Description: This selects whether to add a PCR to the output stream.
Parameters: Yes or No.
Intf1 Mode
Intf2 Mode
Description
No Output Disables the MPEGoIP interface.
IGMP Only outputs data when requested via IGMP.
Always Output Always outputs data on the port.
Intf1 Mode
Intf2 Mode
Description
No Output Disables the MPEGoIP interface.
IGMP Only outputs data when requested via IGMP.
Always Output Always outputs data on the port.
To Next Page
Loading...
Need help?
General