4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4-55
Setup Menu: Outputs: TS Out: MOIP1, Continued
v46
DestAddr
Description: Enter the MPEGoIP destination IP address.
Parameters: 0 to 255 for each of the four fields in the format ###.###.###.###.
UDPPort
Description: This selects the destination UDP port number.
Parameters: 1 to 65535.
SrcPort
Description: This selects the source UDP port number.
Parameters: 1 to 65535.
TS/IP
Description: This selects the maximum number of transport packets per IP
packet.
Parameters: 1 to 7.
Min IP/s
Description: This selects the minimum number of transport packets per IP
packet.
Parameters: 1 to 7.
PCR@IP Start
Description: This selects whether to always transmit a new Ethernet Packet
when a new Program Clock Reference (PCR) arrives.
Parameters: Yes, No.
SAP
Description: This selects whether to use the configured SAP string as the channel
name.
Parameters: Yes or No.
To Next Page
Loading...
Need help?
General