4-54 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Setup Menu: Outputs: TS Out: MOIP1, Continued
Descramble Mode
Description: This parameter selects whether the transcoder should scramble the
output even if it is authorized to receive the channel.
Parameters: Scrambled or Descrambled. Default is Descrambled.
Regenerate
Description: This selects whether to regenerate the PSI tables.
Parameters: Always or As Needed (only if the content has changed).
Insert Null Packet
Description: This parameter selects whether to insert null packets in the output
stream.
Parameters: Yes or No.
Instance Name
Description: This is the DPM output instance name.
Parameters: Up to 31 characters.
MPEGoIP
Description: Selects the transport protocol to be used for the output stream.
Parameters: RTP or UDP.
SAP
Description: This selects whether to send Session Announcement Protocol
messages.
Parameters: No or Yes.
SAP ID
Description: This is the SAP identifier (ID)/string.
Parameters: Up to 49 characters.
Descramble
Mode
Description
Scrambled Scrambles the output channel even if the PE
is authorized and can descramble the
channel. This setting is not valid for
transcoded programs.
Descrambled Descrambles the output channel, and passes
in-the-clear channels.
To Next Page
Loading...
Need help?
General