4-18 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Status Menu: TS Input, Continued
NetID
Description: Indicates the Network ID of the uplink signal the transcoder is to
receive when using the selected preset. The transcoder’s Network
ID must match the Network ID associated with the transmitted
signal that identifies the NIT to be used.
Note: Each network must be assigned a unique ID (number).
Parameters: 1 to 65535.
TxID
Description: Indicates the Transport ID.
Parameters: 1 to 65535.
LNB Stat
Description: Indicates the current LNB connection status.
Parameters: Overload, OverTemp, No Connect, Normal or N/A.
LNB Power
Description: Indicates the LNB voltage at the received input port.
Parameters Off, 13V or 18V.
Polar
Description: Indicates the polarity of the received signal.
Parameters: Hor, Vert or Auto.
LO Select
Description: Indicates whether a 22 kHz tone is available on input port RF1. This
is applicable for dual-band applications.
Parameters: On, Off or Auto.
PROGRAM PIDS
PE
Description: Indicates the Program Entry number.
Parameters: 1 to 4.
Name
Description: Indicates the name assigned to the Program Entry.
Parameters: Up to 4 alphanumeric characters.
Type
Description: Indicates the type of program associated with incoming PID.
Parameters: PMT, PCR, VID, AUD, SUBT, CDT, ECM, EMM, DATA, MPE, VBI
or DPI.
To Next Page
Loading...
Need help?
General