4-24 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Setup Menu: Admin, Continued
LCD Contrast
Description Adjusts the contrast of the LCD menu panel.
Parameters: 1 (lowest contrast) to 30 (highest contrast).
DL Mode
Description Sets the download mode.
Parameters: FPGA Once, Always or Never.
Note: Forced downloads (initiated by the uplink) are always
accepted and always result in a reboot of the transcoder. Service
interruption will occur!
DL FPGA
Description Sets the FPFA download mode.
Parameters: Enable or Disable.
DL Status, Type, Bank
Description Indicates the DL Mode status, type and bank (i.e., type of code).
Parameters: DL Status - Idle, Running, Timeout. Idle indicates the transcoder is
waiting for a download. Running indicates the transcoder is
processing a download. Timeout indicates the transcoder didn’t
complete the download.
Type - rearpanel is only supported at present.
Bank - the type of code, either Application or FPGA.
Limit Version
Description Indicates the current FPGA version number.
Parameters: Read-only alphanumeric value.
DL Mode Setting Description
Always Unforced download will be
accepted and saved in memory.
FPGA Once An unforced download will be
accepted, followed by a reboot of
the transcoder, and the DL Mode
will change to Never.
Never Unforced downloads will not be
accepted.
To Next Page
Loading...
Need help?
General