4-36 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide 4023074 Rev B
Setup Menu: IP, Continued
SNMP Read
Description: The SNMP Community Read and Write fields are used when
communicating with a device within an SNMP environment. These
commands allow you to set the password to read and write data to
a device to display diagnostics traps/alarms. The options are public
(default) and or a custom string.
Parameters: Use the default community string called public or enter a custom
community string. To set a custom community string, enter an
alphanumeric character string up to 31-characters in length
identifying the password for the device. Note that the community
string is case-sensitive.
SNMP Write
Description The SNMP Community Read and Write fields are used when
communicating with a device within an SNMP environment. These
commands allow you to set the password to read and write data to
a device to display diagnostics traps/alarms. The options are public
(default) and or a custom string.
Parameters:Use the default community string called public or a
custom community string. To set a custom community string, enter
an alphanumeric character string up to 31-characters in length
identifying the password for the device. Note: The community
string is case-sensitive.
Add
Description: Up to 10 entries can be assigned to the Trap Destination and
Community string fields.
Trap IP Address
Description: This sets the destination for SNMP trap messages for events (i.e.,
fault messages).
Parameters: Up to 12 digits, e.g., 155.128.100.200.
Edit, Del
Description: You can choose to Edit or Delete entries.
Parameters:
To Next Page
Loading...
Need help?
General