Cisco UCS C885A M8 - Page 45

Figure 27: Left Front and Right Front Rails
Step 2 Install rear right and left rails:
a) Align the guide pins of the right rail with the rack holes on the rear right side.
b) Push the rail until it hooks into position.
c) Check whether the rail hook position is hooked.
Figure 28: Rear Right Rail
d) Align the guide pins of the left rail with the rack holes on the rear left side.
e) Push the rail until it hooks into position.
f) Check whether the rail hook position is hooked.
Cisco UCS C885A M8 Server Installation and Service Guide
35
Installing the Server
Installing the Server