Codan 8525B Series User Manual

Using tone call
8-4 Outback HF Radiophone
Step Action… Display shows… Remarks…
6.
Use the numeric
buttons to enter
the t1 Hi tone
frequency.
Entering a new
number overrides
an existing
frequency.
If you enter an incorrect
frequency, the display
shows an error. For
further details, refer to
section 12, Display
messages.
There are four pairs of
tone frequencies that you
can set, t1, t2, t3 and t4.
The t1 & t2 frequencies
are pre-set in the factory.
If you wish, you may
alter settings.
Each tone setting has a
high and low frequency.
7.
Press
Enter
You must
complete the next
step within 60
seconds.
This sets the new t1 Hi
tone frequency and
allows you to set the t1
Low tone frequency.
8.
Use the numeric
buttons to enter
the t1 Low tone
frequency.
Entering a new number
overrides an existing
frequency.
9.
Press
Enter
You must
complete the next
step within 60
seconds.
This sets the new t1 Low
tone frequency and
allows you to set the next
tone pair t2.
F

Codan 8525B Series Specifications

General

Brand	Codan
Model	8525B Series
Category	Transceiver
Language	English