To Next Page

To Previous Page

Using the Radiophone

Outback HF Radiophone 4-9

Selecting channels

There are two methods of selecting channels:

• Using the Channel Up or Down buttons—this method is preferable when you are

changing to an adjacent channel

• Using the Select Channel button—since there may be up to 600 channels

available, this method is preferable when you are changing channels over a large

range.

Using the Channel or buttons

Step Action… Display shows… Remarks…

Press either of the

Channel buttons

The channel number

selected appears in the

lower left hand corner of

the display, and the

transmit and receive

frequencies to the right.

Channels you have

programmed from the

front panel will have

either an F or P in front

of the number.

Pressing these buttons

moves to the next higher

or lower channel. Keep

the button pressed to

move quickly through the

channels.

For details on F and P

channels, refer to

sections 6 & 7

respectively.

Codan 8525B Series User Manual

Other manuals for Codan 8525B Series