Using selective call
5-20 Outback HF Radiophone
Returning a received call—general
This procedure is used when you want to return a call that has been stored in the
memory stack.
Step Action… Display shows… Remarks…
1.
Select the call you
wish to return.
If necessary, tune
the antenna.
The display shows the
channel number and the
identification address of
the caller.
Refer to Reviewing the
list of received calls in
memory on page 5-21.
2.
Press
Call
Selective
The call details are now
deleted from memory,
but ready to transmit.
3.
Check that the
channel is free
from traffic, then
press
Call
Selective
The display shows the
details of the next
unanswered call.
The Radiophone sends
the selective call and the
transmit indicator will
light.
If the call is answered,
proceed to use the
Radiophone in the
normal way.
q
To Next Page
Loading...
Need help?
General
