Display messages
12-8 Outback HF Radiophone
Reviewing the EPROM program content
With the Radiophone on, push and hold the On/Off button. The display will show the
following test displays at three second intervals. On releasing the On/Off button the
Radiophone is turned off.
No. of ’beeps’ Message displayed Meaning
0
.
.
.
:
:
.
Display lamp test: all segments must
be on and all the indicators lit.
0
This shows the Program (EPROM)
type number.
(example 90-20513-100)
0
Program (EPROM) issue number.
(example 4.3). Some indicator lamps
will turn off.
0
The top line shows the number of
channels programmed by the factory
or agent, this can be up to 501.
The second line shows the number of
channels programmed by the user,
this can be up to 99 or 89 with the
telephone mode enabled.
F
To Next Page
Loading...
Need help?
General
