Using the Radiophone
4-2 Outback HF Radiophone
Switching the Radiophone on or off
When you switch the Radiophone on, the display usually shows the last settings
before the Radiophone was switched off. If your Radiophone has a personal
identification number (PIN) allocated, then the display will request you to enter your
PIN.
This section covers two methods of switching your Radiophone on or off:
• switching on or off without a PIN
• switching on or off with a PIN
Switching on or off without a PIN
Step Action… Display shows… Remarks…
1.
Ensure power is
supplied to your
Radiophone.
2.
Press
On/Off
You will see this display
for one second
and then the last channel
and frequencies selected
The Mute and Mode
indicators and the LCD
display illuminate.
The Radiophone is
turned on and
automatically set to the
last channel and volume
settings used.
3.
To switch off,
press
On/Off
The display and
indicators go off.
The Radiophone is
turned off.
q
To Next Page
Loading...
Need help?
General
