Codan 8525B Series - Reviewing calls held in memory

Using selective call
5-22 Outback HF Radiophone
Reviewing calls held in memory
This procedure allows you to review all calls held in the memory in the order
received. Ensure the Radiophone is not in scan mode when reviewing the list of
selective calls received.
If no calls have been made to your Radiophone, the display will continue to show
both the channel and frequency numbers.
Step Action… Display shows… Remarks…
1.
No action, this is
what you will see
on the display of
your Radiophone.
If scanning – and
not on the channel
that called – the
display will show
CALd.
The last call recorded
will be shown in the
display.
2.
To view the calls
held in memory,
press and hold
Channel
Select
until the display
shows . . .
then press within
one second
Channel
Select
again and the
display shows . . .
The first station to call
will be displayed first.
The display shows the
callers identification
code (1374) and the
channel used (38).
F