Using the Radiophone
Outback HF Radiophone 4-3
Switching on or off with a PIN
It is most important not to forget your PIN, otherwise you will never be able to switch
on your Radiophone. If this happens, you will have to return the transceiver to Codan
for them to delete the allocated number.
Step Action… Display shows… Remarks…
1.
Ensure power is
supplied to your
Radiophone.
2.
To switch on,
press
On/Off
You will see this display
for one second
and then this display
The Mute and Mode
indicators and the LCD
display illuminate.
3.
Use the numeric
buttons to enter
your PIN.
You must enter the
correct PIN, otherwise
your Radiophone will
never turn on to the
operating mode.
4.
Press
Enter
The display is
automatically set to the
last channel and volume
settings used.
The Radiophone is
turned on and can now be
operated.
5.
To switch off,
press
On/Off
The display and
indicators go off.
The Radiophone is
turned off.
q