Codan 8525B Series User Manual

RFDS and Telstra services
10-10 Outback HF Radiophone
Transmitting a Telstra selective beacon call
The beacon facility is used to check signal conditions between your Radiophone and a
selected Telstra station.
Step Action… Display shows… Remarks…
1.
Ensure your
Radiophone is
switched on.
The last channel selected.
2.
Select the
required test
channel and tune
the antenna.
Refer to section 4,
Selecting channels.
3.
Press
S’Call
OTC
When this button is
pressed, the S’Call Mute
is automatically switched
off.
4.
Press
Channel
Select
until the required
selective beacon
address number
appears against
the Telstra station
selected .
This example allows you
to send a Telstra
selective beacon call to
Brisbane–104.
F

Codan 8525B Series Specifications

General

Brand	Codan
Model	8525B Series
Category	Transceiver
Language	English