Codan 8525B Series User Manual

Using the Radiophone
4-22 Outback HF Radiophone
Transmitting a message
Step Action… Display shows… Remarks…
1.
Select a channel
for transmission.
The display shows the
channel number and the
transmit (Tx), and
receive (Rx) frequencies.
Refer to page 4-9,
Selecting channels.
2.
Check the display
to see if the
channel transmit
frequency has
been enabled.
If the display shows
’inhib’ then the channel
frequency is for receive
only purposes.
If the channel has been
enabled, continue with
step 3.
If not and the display
shows ’inhib’ then you
will have to select
another channel on which
to transmit.
3.
Tune the antenna. Refer to page 4-14,
Tuning the antenna.
4.
Listen and check
that the channel if
from traffic.
F

Codan 8525B Series Specifications

General

Brand	Codan
Model	8525B Series
Category	Transceiver
Language	English