Changing the set-up options
11-14 Outback HF Radiophone
Power-on settings
There are two power-on settings that may be set at any time without the need to move
or install any internal links. These are the default settings that will always be present
when you switch on the Radiophone.
• Mute settings. This facility allows you to select either Voice Mute on/off, or
S’Call Mute on/off.
• Beep volume. This facility allows you to set the beep volume to either loud or
soft.
Mute settings
Step Action… Display shows… Remarks…
1.
Hold down
Voice
Mute
and press
On/Off
Hold down the Voice
Mute button until the
display shows
This switches your
Radiophone on and into
the Mute set-up mode.
2.
To select either
Voice Mute on or
off, press
Voice
Mute
No change in the display. The Mute is on when the
indicator is lit.
If you wish to select
Voice Mute on, proceed
to
step 4.
If you wish to select
S’Call Mute proceed to
step 3.
F
To Next Page
Loading...
Need help?
General
