Using selective call
Outback HF Radiophone 5-19
Answering a received call
This procedure is used when you want to begin talking on a call that has just been
received on your Radiophone which is still producing the ringing tone.
Step Action… Display shows… Remarks…
1.
The display shows
the channel
number and the
identification
address of the
caller.
2.
Press the
microphone PTT
button twice in
succession.
The display either reverts
back to the normal
display or shows the
details of the next (if
any) unanswered calls.
The first press of the
PTT button cancels the
call and the S’Call Mute.
The second press of the
PTT button allows you to
transmit to the caller.
Proceed to use the
Radiophone in the
normal way..
q
To Next Page
Loading...
Need help?
General
