Codan 8525B Series User Manual

Using selective call
5-14 Outback HF Radiophone
Transmitting a selective call
For selective call to operate you must have your self-identification number
programmed, refer to Setting the self-identification address on page 5-7.
Step Action… Display shows… Remarks…
1.
Select the
required channel.
Ensure the channel is
enabled for selective call.
Press the Display button
to view the enabled
options.
If you need to enable the
channel, refer to
Enabling a channel for
selective call on page
5-12.
2.
Press
Voice
Mute
to turn the Voice
Mute to the off
position.
The display does not
change.
The indicator will go out,
and you will hear
background noise.
3.
Check that the
channel is free
from traffic.
If the channel is
busy; wait until
the channel is
free, or try
another channel.
The display does not
change.
You will need to listen
for approximately 10
seconds to ensure the
channel is free.
F

Codan 8525B Series Specifications

General

Brand	Codan
Model	8525B Series
Category	Transceiver
Language	English