Using the Radiophone
Outback HF Radiophone 4-13
Using the mute controls
There are two mute controls that inhibit background noise until a signal is received:
• Voice Mute—this function inhibits background noise until a voice signal appears.
• S'Call Mute—this function inhibits background noise until your transceiver has
been selectively called.
Voice mute
Step Action… Display shows… Remarks…
1.
To switch on and
off press
Voice
Mute
The display does not
change.
The indicator is lit when
this option is selected.
Inhibits background
noise until a voice call is
received.
q
Selective call mute
Step Action… Display shows… Remarks…
1.
To switch on
press
S’Call
Mute
to switch off press
Voice
Mute
The display does not
change.
The indicator is lit when
this option is selected.
Inhibits background
noise until a selective
call is received.
q