Outback HF Radiophone 4-1
4. Using the Radiophone
This section covers the basic steps necessary to operate your
Radiophone.
It outlines how you use the control buttons to make various
adjustments and settings, and includes transmitting and
receiving calls.
Throughout this section all displays show examples of
channel and frequency numbers. You must insert your
selected channel and frequency numbers as appropriate.
Unless otherwise stated, it is assumed throughout this section
that:
• 12V DC power is supplied to your Radiophone
• the Radiophone On/Off button is switched on.
Refer to Switching the Radiophone on or off on page 4-2.
To Next Page
Loading...
Need help?
General
