Making a telephone interconnect call
Outback HF Radiophone 9-15
Deleting a stored telephone number
This facility allows you to delete a stored telephone number. Ensure your Radiophone
is switched on and a selective call enabled channel has been selected before
commencing this operation.
As soon as you enter the number to be deleted, it is deleted immediately from
memory without any warning. To prevent deleting numbers you need, ensure
you make the correct choice first time, you do not get a second chance.
Step Action… Display shows… Remarks…
1.
Press
Call
Selective
You must start the next
action within 60 seconds.
2.
Use the numeric
buttons to enter
the required
selective call
address.
This is the self
identification number of
the base IPC-500
telephone interconnect
you are using. Refer to
section 5, Using selective
call.
3.
Press
Enter
If a telephone number
appears in this display,
press the Voice Mute
button to clear this
number. (This will have
been the last number
called.)
F
To Next Page
Loading...
Need help?
General
