Changing the set-up options
11-8 Outback HF Radiophone
PTT timer
This facility stops the Radiophone from being left on in the transmit state. If the
transmit time exceeds the PTT timer setting, the Radiophone reverts to the receive
mode and an error message is displayed.
The timer is set at the factory to 10 minutes. You may turn this facility off, or vary the
time, in five minute intervals, between 5 and 35 minutes.
Step Action… Display shows… Remarks…
1.
Turn the
Radiophone off
and move the
control head link
from position E to
position 1.
No display. Refer to the procedure on
page 11-3.
2.
Hold down
Tune
and press
On/Off
Hold the Tune button
down until the display
shows
This turns the
Radiophone on, and into
the PTT timer set-up
mode.
3.
Press
1
Fast
or
6
Fast
The PTT time out time
can be changed from 5 to
35 minutes.
Press either the
or
buttons to increase
or decrease the time.
Stop at the setting you
require.
F
To Next Page
Loading...
Need help?
General
