Display messages
12-4 Outback HF Radiophone
No. of ’beeps’ Message displayed Meaning
1
The nominated channel is already
programmed.
1
There are four program inhibit
options available. Refer to Setting up
the P-channel inhibit options in
section 7.
1
An emergency call, tone call or a
selective call has been attempted on a
channel where that function has not
been enabled.
1
Full inhibit has been programmed.
2
The microphone PTT has been active
for a longer time period than set.
Refer to section 11, Changing the
set-up options..
1
A request for you to enter a selective
call address.
1
The telephone mode is off.
F
To Next Page
Loading...
