Using the Radiophone
Outback HF Radiophone 4-15
Receiver tuning mode
Your Radiophone can be tuned to receive frequencies in the range 0.25 MHz to
30 MHz.
Note: Due to internally generated signals, it will be difficult to receive on and near
frequencies 6599, 9998, 13199, 19799, 19995 and 26399 kHz.
While you are in receiver tuning mode you cannot receive selective calls or tone calls.
Note: The Tune button should be pressed to improve reception. This is also
recommended for transmit inhibit channels.
This procedure covers the two methods of changing the Radiophone frequency, and
how to store a receive only frequency:
• using the Receiver Tuning
or buttons—this method is preferable for
small changes in frequency.
• selecting the desired frequency—this method is preferable for large changes in
frequency
• storing a tuned receive only frequency.
To Next Page
Loading...
Need help?
General
