Codan 8525B Series User Manual

Using selective call
5-32 Outback HF Radiophone
Testing the selective call functions
This is a special test mode which will not be required for normal operations.
In this mode, the Radiophone decodes all selective call signals, and displays the
address to which it was sent and the self identification of the calling station.
No called alarms or revertives are generated. (A revertive is a signal transmitted back
from the receiving Radiophone to indicate message received and decoded
satisfactorily.)
Ensure your Radiophone is switched off before entering this mode.
Step Action… Display shows… Remarks…
1.
Press and hold
2
Slow
and press
On/Off
Do not hold down the
On/Off button, just the
Slow button for
approximately five
seconds.
2.
Press
S’Call
Mute
within 10 seconds
of releasing the
2
Slow
button.
3.
No action. After
approximately
five seconds the
display changes.
The display stays the
same until a selective call
is received.
F

Codan 8525B Series Specifications

General

Brand	Codan
Model	8525B Series
Category	Transceiver
Language	English