Display messages
12-2 Outback HF Radiophone
Messages and operator errors
No. of ’beeps’ Message displayed Meaning
2
The automatic antenna has been
satisfactorily tuned.
2
The automatic antenna has failed to
tune.
2
An attempt has been made to transmit
before the automatic antenna has
been tuned. Wait until the automatic
antenna has tuned.
If a fault exists, refer to the antenna
handbook for details.
1
An attempt has been made to enter
more than 15 channels in the scan
program.
0
Displayed when programming scan
and shows that a channel has been
entered in the scan program.
1
Channel does not exist.
F
To Next Page
Loading...
Need help?
General
