Codan 8525B Series User Manual

Making a telephone interconnect call
9-22 Outback HF Radiophone
Step Action… Display shows… Remarks…
5.
When the
telephone
subscriber
answers, they will
hear a short pre-
recorded message
informing them
that this is a radio
telephone call.
This is followed
by a single tone of
one second
duration heard by
both parties.
You may now use
the Radiophone in
the normal
communication
mode.
The display shows
for any call that has not
been returned.
The indicator light
flickers whilst talking.
The viewed call is
deleted from the memory
stack when you press the
PTT button on the
microphone.
On completing the call,
you must send a
disconnect message
(refer to Sending a
disconnect message on
page 9-6).
6.
Repeat steps 1 to
5 to clear all calls
stored in the
memory stack.
7.
Press
Channel
Select
to return the
Radiophone to
normal operation.
q

Codan 8525B Series Specifications

General

Brand	Codan
Model	8525B Series
Category	Transceiver
Language	English