Using selective call
Outback HF Radiophone 5-3
This term… Means…
Revertive Signal A signal automatically transmitted back from the receiving
Radiophone to indicate message received and decoded
satisfactorily.
This signal does not apply to group calls.
Selective beacon
call
A call used to check signal conditions to a selected station.
Self-identification The four digit identification number of the calling
Radiophone.
Station A term used for the location of a Radiophone or transceiver.
Selective call
encode/decode
The Radiophone can transmit and receive a selective call.
q
To Next Page
Loading...
