Codan 8525B Series User Manual

Using selective call
5-26 Outback HF Radiophone
General information for both modes of operation
The beacon signal consists of four long tones.
Self-identification addresses ending in 99 should be avoided
as these will cause confusion.
No alarm or call is recorded at the receiving Radiophone,
only the Tx indicator flashes.
If the receiving Radiophone is in scan mode, the scan
sequence recommences immediately.
Normal selective call operation is not affected.
q

Codan 8525B Series Specifications

General

Brand	Codan
Model	8525B Series
Category	Transceiver
Language	English