Using the receiver in scan mode
6-4 Outback HF Radiophone
Step Action… Display shows… Remarks…
4.
Press
Scan
Switches to Auto option.
If this is the option you
want, go to step 7.
5.
Press
Scan
Pressing the Scan
button again
returns you to the
display in step 2.
Switches from inhib to
ENAbLE.
Note: If you select automatic scanning, you now have the option of
selecting Selective Call Mute to be enabled as soon as you
enter the automatic scan mode. If you wish to select this option
then continue with step 6, if not, go to step 7
6.
Press
S’Call
Mute
The display does not
change.
The indicator will be lit.
You have now selected
selective call mute to be
enabled as soon as you
enter the automatic scan
mode.
7.
Press
On/Off
No display. Your selection has been
made and the
Radiophone is now
switched off.
q
To Next Page
Loading...
Need help?
General
