Software
Copyright © 2015 Coda Octopus Products Ltd
110
F180R MOTION Sensor User and Reference Guide
5.3.13 Upload Settings
Figure 91: MOTION Settings Wizard - Upload Settings
Once you have completed the Configuration Wizard, you can then decide whether you wish to
upload the settings to the unit. Once the settings have been uploaded to the F180R System, a
system restart is necessary in order for the system to initialise and use the newly configured
settings.
When the F180R System is switched on or restarted it will automatically use the settings last
loaded to the system.
If the Configuration Wizard is completed without any changes being made to the downloaded
configuration parameters, an alternative dialog appears informing you of this and noting that
no action is required.
To Next Page
Loading...