CodaOctopus F180R - Calibration Specification

Operation
Copyright © 2015 Coda Octopus Products Ltd
68
F180R MOTION Sensor User and Reference Guide
Once calibrated, the calibration and the settings saved to the F180R System will remain valid
for at least 6 months if the F180R System and the GNSS antennas are not disturbed; you MUST
recalibrate the system if either the F180R System or the GNSS antennas are moved.
4.3.3 Calibration Specification
The F180R System is calibrated when the heading and attitude accuracies are equal to, or
better than the following specifications:
NOTE: It is important when evaluating the F180R System performance that the
specified position and velocity accuracies and those achieved by the system are
compared using the same units of measurement. This table shows the system
specification in all the available application units.
Receiver type
Antenna Baseline Distance
(metres)
1
2
3
4
Stand Alone (No GPS Corrections)
Heading (°)
0.25
0.2
0.1
0.07
Attitude (°)
0.075
Position (m)
0.5
(ft)
1.64
(yd)
0.55
Velocity (m/s)
0.04
(km/h)
0.144
(mi/h)
0.089
(knot)
0.077
DGPS
Heading (°)
0.25
0.2
0.1
0.07
Attitude (°)
0.06
Position (m)
0.25
(ft)
0.82
(yd)
0.27
Velocity (m/s)
0.03
(km/h)
0.108
(mi/h)
0.067
(knot)
0.058
RT-20 RTK