Software
Copyright © 2015 Coda Octopus Products Ltd
83
F180R MOTION Sensor User and Reference Guide
Figure 66: Save Calibration dialog
Export
Select Export to write the current Calibration values to a text file on your PC.
NOTE: Please see the Invalid Calibration chapter on how to spot an invalid calibration
and why they can be invalid.
5.2.1.1.2 Ethernet Source - Logging Tab
The Logging Tab presents all the controls that are required to manage data logging on the
F180R System. These include logging mode, start logging, stop logging and the file storage
location.
Figure 67: Logging Tab
Setup
In Setup you must specify the mode, location and properties that affect how MCOM files are
logged. You can only change the properties while logging is not active.
To Next Page
Loading...