Software
Copyright © 2015 Coda Octopus Products Ltd
96
F180R MOTION Sensor User and Reference Guide
You can add your own comments to the text window if they wish by clicking on the Add
Comment icon .
You can clear all lines from this window by clicking the Clear Log icon . A confirmation
dialog will appear.
You can save the contents of the text window to a text file by clicking the Save Log icon
.
5.2.5 System Indicator
Once you are connected via ethernet to the MOTION Sensor it will display the system model
in the right hand corner of the Main Interface. For example /F175 Series, /F180 Series etc.
5.3
MOTION Settings Wizard
Each F180R System deployment has its own characteristics due to the physical setup of the
system and antenna. Coupled with this there are a choice of options on what outputs to use.
The MOTION Settings Wizard allows you to sequentially browse through and configure the
parameters to suit your deployment. As well as being easy to setup, the F180R System is also
easy to configure taking only a few minutes to complete the configuration prior to calibrating
and using the system.
NOTE: You can only run the MOTION Settings Wizard when you are connected to a
F180R System.
To Next Page
Loading...