Software
Copyright © 2015 Coda Octopus Products Ltd
72
F180R MOTION Sensor User and Reference Guide
5 Software
This chapter describes how to use the MOTION Control to control and view data from the
F180R System.
The MOTION Control software supplied with the system runs on an IBM–compatible PC under
a Microsoft® Windows™ Vista, 7 and 8 both 32 bit and 64 bit environments and provides
several important and useful functions:
configuration and real–time data display
F180R System calibration and QC diagnostics
long period heave processing (iHeave)
interface capabilities with external receiving equipment
data acquisition and playback
With MOTION Control the MCOM2CSV application gets installed.
5.1
Installation / Uninstallation
5.1.1 Software Installation
1. Start the installation by running the
MOTIONControlInstaller.exe from the supplied
disc or download from the CodaOctopus Support
Website.
Click Next to continue and display the End User
Licence Agreement.
2. Read the End User Licence Agreement and
click the radio button to accept the agreement.
You cannot install the software unless you
accept the agreement. Click Next to continue.
To Next Page
Loading...