Software
Copyright © 2015 Coda Octopus Products Ltd
74
F180R MOTION Sensor User and Reference Guide
5.2
Main Interface
The main MOTION Control application interface provides access to all configuration, control
and diagnostic functions that you will require to operate the F180R System hardware.
Figure 53: MOTION Control Main Interface
There are four main areas in MOTION Control:
Ribbon Bar Tabs
Real Time Data Display
System Status
Message Log
System Indicator
5.2.1 Ribbon Bar Tabs
The Ribbon Tabs are the means of navigating and accessing options in MOTION Control.
The Home Tab allows you to select your Data Source. Depending on your choice the tabs will
then change. The default view consists of the tabs Home and Help.
To Next Page
Loading...