Software
Copyright © 2015 Coda Octopus Products Ltd
86
F180R MOTION Sensor User and Reference Guide
Upon selecting the Replay button on the Home tab a standard Explorer window from where
you can select the relevant MCOM file for playback will be displayed. The Home tab will also
show the Replay options, the Calibration Status and the Logging Tab will be added.
Figure 70: Replay - Home Tab
The Replay button are used as follows:
Stop playback of data file
When in Replay mode the Status bar will show the logging status, which file is currently
played back an the file playback progress.
Figure 71: Replay Status Bar
5.2.2 Real Time Data
The real time data area is displayed as part of the main application interface. It displays each
of the main outputs of the F180R System as a numeric value and is dynamically updated 4
times per second to reflect the current real-time system outputs.
To Next Page
Loading...