Software
Copyright © 2015 Coda Octopus Products Ltd
73
F180R MOTION Sensor User and Reference Guide
3. If you want to install MOTION Control to
another path than the suggested default path
click Browse to chose another installation path
otherwise click Next to continue.
4. The InstallShield will notify you that it is ready
to install the application. If necessary, you can
select Back to review any of the settings you
have previously selected. If you are happy with
your selection then select Install to proceed.
5. The final stage confirms successful installation
of the software. Click Finish to close the dialog
panel. You will see the new MOTION Control
icon on your PC desktop. Double–click this icon
to launch the MOTION Control application.
5.1.2 Software Uninstallation
Choose for:
Windows XP: Start > Settings > Control Panel > Add or Remove Programs
Windows Vista/7: Start > Control Panel > Programs > Programs and Features
and use the Windows facility to uninstall the MOTION Control software from your PC.
To Next Page
Loading...