Software
Copyright © 2015 Coda Octopus Products Ltd
78
F180R MOTION Sensor User and Reference Guide
Figure 59: Change IP Address Dialog
NOTE: If you change the F180R System IP Address, remember that to retain the
capability to control the F180R System, you may have to also change your PC IP
Address to be included in the same subnet (netmask). To control the F180R System,
the host PC must be on the same subnet address as the F180R System. If not, then the
F180R System will operate in listen mode only.
5.2.1.1.1.3 Update Firmware
This option will prompt you for the location of the new firmware you want to upload to the
F180R System.
Figure 60: Select the folder that contains the firmware
To Next Page
Loading...