Software
Copyright © 2015 Coda Octopus Products Ltd
97
F180R MOTION Sensor User and Reference Guide
5.3.1 Introduction
Figure 77: MOTION Settings Wizard - Introduction
There are 4 options to choose from when starting the configuration:
Download Settings From System - This will read the current configuration settings from
theF180R System and display the values in the application. It will be greyed out if there
isn't a valid control connection to the F180R System.
Use New Settings - The configuration will be started with the default setting and you
can change them to suit your needs.
Load Settings From Disk - This option lets you load a previously defined system
configuration which has been saved on your PC.
Use Previous Settings - Will load the last settings that were entered into the application.
These will not necessarily be the same as the last settings saved to the F180R System.
To Next Page
Loading...