Software
Copyright © 2015 Coda Octopus Products Ltd
75
F180R MOTION Sensor User and Reference Guide
Figure 54: None - Data Source Home Tab
From the Home Tab you can select the Data Source, set the Real Time Data Settings and choose
the Skin settings to change the appearance of the software.
Figure 55: Help Tab
The options on the Help tab will always stay the same no matter which Data Source you
choose. From the Help tab you can open the MOTION Control Manuals in PDF or CHM (HTML
Help) format, have a look at the Release Notes, find out how to Contact Support if needed,
Update Version of MOTION Control and find current version, hardware calibration, firmware
information and configured receivers in Help About. See Help About for more detailed
information.
5.2.1.1 Data Source - Ethernet
When the Data Source Ethernet is chosen the Home tab will be extended with some View
options.
Figure 56: Ethernet - Data Source Home Tab
Start the MOTION Settings Wizard by clicking on Setup. From the new View options you can
launch the Motion Data window, select from different Diagnostic tools and launch the iHeave
display. Rebroadcast MCOM allows you to Rebroadcast the MCOM data to another network
and/or port.
In addition to the View options on the Home tab the tabs Live and Logging become available.
To Next Page
Loading...