CodaOctopus F180R - Page 94

Software
Copyright © 2015 Coda Octopus Products Ltd
94
F180R MOTION Sensor User and Reference Guide
The Correction field indicates the type of GPS correction that the user has selected to apply to
this session. The correction type is selected in the Configuration Wizard. It is very important to
select the type of correction that is applicable to the session. Failure to do so can result in the
system incorrectly reporting its Calibration Status. The Correction field can be one of three
states:
Field
Description
None (Stand Alone)
The user has indicated that there are no corrections being
supplied to the F180R System system.
DGPS
The user has indicated that DGPS corrections are being
supplied to the F180R System system.
RTK
The user has indicated that RTK (2cm or 20cm) corrections are
being supplied to the F180R System system.
The Recalibration Date field can take one of the following 3 options:
LED Colour
Field
Description
Grey
Not Connected
The application does not have
a valid connection to an F180R
System data source.
Red
Last Calibration Date
The F180R System is due for
recalibration
Yellow
Last Calibration Date
The F180R System is within 90
days of when the system
needs re-calibrated
Green
Last Calibration Date
The F180R System is calibrated
and is not due for re-
calibration