1203 - 01 Modem external TIP/RING
failed.
1203 - 02 Modem external DATA TIP/RING
failed.
1203 - 03 Modem line termination
failed.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1204 - xx Modem Auto Originate Test The following steps apply to error
codes 1201 - 01 through 1210 - 11:
1204 - 01 Modem timed out waiting for
SYNC. 1. Check the jumper settings on
the system board (see Chapter 9,
1204 - 02 Modem timed out waiting for "Jumper and Switch Settings").
response. 2. Check the modem connection to
the 32 bit memory/modem
1204 - 03 Modem exceeded data block interface board.
retry limit. 3. Replace the modem and retest.
4. Replace the 32 bit memory/modem
1204 - 04 RVC exceeded carrier lost interface board and retest.
limit. 5. Replace the system board and
retest.
1204 - 05 XMIT exceeded carrier lost
limit.
1204 - 06 Time out waiting for dial
tone.
1204 - 07 Dial number string too long.
1204 - 08 Modem timed out waiting for
remote response.
1204 - 09 Modem exceeded maximum
redial limit.
1204 - 10 Line quality prevented
remote connection.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1204 - 11 Modem timed out waiting for The following steps apply to error
remote connection. codes 1201 - 01 through 1210 - 11:
1205 - xx Modem Auto Answer Test 1. Check the jumper settings on
the system board (see Chapter 9,
1205 - 01 Modem timed out waiting "Jumper and Switch Settings").
for SYNC. 2. Check the modem connection to
the 32 bit memory/modem
1205 - 02 Modem timed out waiting interface board.
for response. 3. Replace the modem and retest.
4. Replace the 32 bit memory/modem
1205 - 03 Modem exceeded data block interface board and retest.
To Next Page
Loading...
Need help?
General