Compaq PORTABLE 386 User Manual

1714 - 10 Failed diskette sector wrap (see Chapter 9, "Jumper and
during read. Switch Settings").
2. Replace the fixed disk drive
1714 - 20 Failed to get diskette drive signal and power cables and
type. retest.
3. Replace the fixed disk drive
1714 - 24 Failed to read diskette media. and retest.
4. Replace the system board and
1714 - 25 Failed to verify diskette retest.
media.
1714 - 40 Cylinder 0 error.
1714 - 48 Failed to move disk table
to RAM.
1714 - 49 Failed to read diskette media
in File Write Test.
1714 - 50 Failed File I/O Write Test.
1714 - 51 Failed File I/O Read Test.
1714 - 52 Failed File I/O Compare
Test.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1714 - 55 Failed cylinder 1. The following steps apply to error
codes 1700 - xx through 1717 - 73:
1714 - 65 Exceeded maximum bad sector
per track. 1. Check the system board jumper
settings and retest
1714 - 70 Failed translate mode. (see Chapter 9, "Jumper and
Switch Settings").
1714 - 71 Failed nontranslated mode. 2. Replace the fixed disk drive
signal and power cables and
1714 - 72 Exceeded maximum bad track retest.
limit. 3. Replace the fixed disk drive
and retest.
1714 - 73 Previously exceeded maximum 4. Replace the system board and
bad track limit. retest.
1715 - xx Fixed Disk Drive Head Select
Test
1715 - 45 Failed to get fixed disk drive
parameters from ROM.
1715 - 53 Failed Drive/Head register
test.
1715 - 54 Failed Digital Input
register test.
------------------------------------------------------------------------------

Compaq PORTABLE 386 Specifications

General

Brand	Compaq
Model	PORTABLE 386
Category	Desktop
Language	English