6-15
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: G-CH06.DOC Last Saved On: 2/8/99 11:27 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Multiple Ways of Viewing the Log
You can view an event in the Integrated Management Log in several ways:
■ On the Integrated Management Display
■ From within Compaq Insight Manager
■ From within Compaq Survey Utility
■ Using the IML Management Utility, a DOS program located on the
Compaq SmartStart and Support Software CD.
Compaq Insight Manager
Compaq Insight Manager is a server management tool providing in-depth fault,
configuration, and performance monitoring of hundreds of Compaq servers
from a single management console. System parameters that are monitored
describe the status of all key server components. By being able to view the
events that may occur to these components, you can take immediate action.
You can view and print the event list from within Insight Manager by following
the instructions below. You can also mark a critical or caution event as repaired
after the affected component has been replaced, for example, if a fan that has
failed has been replaced. By marking it as repaired, you can lower the severity
of the event.
To Next Page
Loading...
