1-8
Introduction
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: B-CH01.DOC Last Saved On: 2/8/99 10:44 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
■ SNMP standards provide integration with other management products.
■ Flexible network conductivity supports multiple transport protocols
including IPX, TCP/IP and PPP to operate over LANs, WANs, and
modems.
■ Support for the following leading operating systems:
❏ Microsoft Windows NT and Windows 95 or later
❏ Novell NetWare, intraNetWare and intraNetWare for Small
Business, NetWare for Small Business
❏ SCO Unix, OpenServer, and UnixWare
❏ ISM OS/2 Warp family of products
In Compaq servers, every hardware subsystem, such as disk storage, system
memory, and system processor, has a robust set of management capabilities.
Compaq Full-Spectrum Fault Management prevents faults before they happen,
keeps the system up and running in the unlikely event of a failure, and delivers
rapid server recovery to normal operation after a fault. See Chapter 5,
“Server Configuration and Utilities,” for more information.
Automatic Server Recovery-2 (ASR-2)
If there is a critical system failure, Automatic Server Recovery-2 allows you to
restart the server and page a designated system administrator. For more
information, see the Compaq Server Online Reference Guide on the Systems
Reference Library CD (SRL).
To Next Page
Loading...
